Questions
How do I become a defence contractor or supplier?
You become a defence contractor or supplier by winning a contract in a tender, or by supplying a company that holds one. Dutch Defence expects a bidder to show technical know-how, financial stability and, depending on the contract, a quality management system. Find where the buyer publishes its tenders and read which requirements the contract names before you bid.
Defence is a government body, so procurement rules apply when it awards a contract. The Dutch government says its page covers contracts that are tendered. It does not say how or whether to approach Defence outside a tender.
Defence expects enough technical knowledge, experience and capacity to carry out the work, and a financial position that guarantees your company's continuity. Depending on the contract it can ask for more, such as a quality management system. It also looks at social and environmental aspects, and for contracts outside the European procurement rules it wants to see how your prices are built up. Bidders need to be able to do business electronically.
Contracts that carry national security risks also fall under the government-wide security requirements, called ABRO. The security answers in this guide explain what that means.
This answer describes Dutch Defence and EU-level rules. Other countries have their own buyers, portals and rules, so check the rules in the buyer's own country before you rely on this answer.
General information, not legal advice.
Sources: Rijksoverheid: When and how can I offer my company or product to Defence (Dutch), Rijksoverheid: Doing business with Defence (Dutch), Defensie.nl: Information for suppliers (Dutch)
Terms: ABRO
Last checked: 2026-11-15. Reviewed on 2026-11-16
Register your company
Where are defence tenders published?
Dutch Defence lists planned and open contracts on TenderNed, in the Official Journal of the European Union and on the Electronic Bulletin Board of the European Defence Agency. Defence must tender a contract Europe-wide when its value is above the applicable threshold. Other countries use their own portals.
Dutch Defence buys military and sensitive material under the Aanbestedingswet op defensie- en veiligheidsgebied (ADV). The Rijksoverheid says Defence must tender every contract above the applicable thresholds Europe-wide. From 1 January 2026 to 31 December 2027 the Directive 2009/81/EC thresholds are EUR 432,000 for supplies and services and EUR 5,404,000 for works, excluding VAT, as set by Commission Delegated Regulation (EU) 2025/2487. They apply until Dutch law transposes Omnibus V, described below.
Some contracts fall outside the European rules: intelligence activities, international cooperation programmes, and contracts for specifically military products and services that Article 346 of the Treaty on the Functioning of the European Union covers.
Each year on Prinsjesdag Defence presents an overview of its materiel projects. According to Defence it covers strategic projects above EUR 50 million and surplus weapons and weapon systems it is disposing of.
Directive (EU) 2026/2383, known as Omnibus V, amends Directive 2009/81/EC. It appeared in the Official Journal on 3 November 2026 and enters into force on 23 November 2026. Member States must transpose it by 24 November 2027 and apply it from 24 February 2028. It raises the thresholds to EUR 2,000,000 for supplies and services and EUR 10,000,000 for works. The publication channels, such as TED and TenderNed, stay the same.
On the EU side, the Commission describes Directive 2009/81/EC as the set of rules for buying arms, munitions and war material, and for sensitive security supplies, works and services.
General information, not legal advice.
Sources: Rijksoverheid: When and how can I offer my company or product to Defence (Dutch), Rijksoverheid: European procurement rules for Defence (Dutch), Defensie.nl: Information for suppliers (Dutch), European Commission: Defence procurement (Directive 2009/81/EC), EUR-Lex: Directive 2009/81/EC (consolidated 1 January 2026), EUR-Lex: Directive (EU) 2026/2383 (Omnibus V)
Terms: ADV, Article 346 TFEU
Last checked: 2026-11-17. Reviewed on 2026-11-17
Register your company
Can a company with no military products sell to defence?
Yes. Dutch Defence buys many civilian products and services as well as military equipment, so a supplier does not need a military product. The usual tender rules and supplier requirements still apply.
The Rijksoverheid lists furniture, vehicles, food, clothing and medicines among what Defence buys, together with services such as cleaning and organisational, information and IT advice.
The Commission names the obstacles SMEs meet in the defence supply chain: language, certification, classified information and export control rules. Its 2018 recommendation on cross-border access proposed measures such as dividing contracts into lots and using proportionate selection criteria.
Whether a civilian product needs quality, security or export paperwork depends on the contract and on the product. Read the tender documents before you assume it does not.
General information, not legal advice.
Sources: Rijksoverheid: When and how can I offer my company or product to Defence (Dutch), European Commission: Defence procurement (Directive 2009/81/EC)
Terms: SME
Last checked: 2026-11-15. Reviewed on 2026-11-16
Register your company
Which EU procurement rules apply to defence contracts?
Directive 2009/81/EC sets the EU rules for buying defence and sensitive security supplies, works and services. It allows buyers to use a negotiated procedure with prior publication as a standard procedure and to ask bidders for guarantees on information security and security of supply. The Netherlands applies it through the ADV.
The Commission describes the directive as adapted to defence procurement, which it calls particularly complex and sensitive. It has specific rules for research and development contracts and national review procedures that give businesses remedies in award procedures.
A buyer may require the winning contractor to award subcontracts competitively, which opens up supply chains.
The Commission reported in 2016 that the directive is largely fit for purpose. Directive (EU) 2026/2383 (Omnibus V), which amends Directives 2009/43/EC and 2009/81/EC, appeared in the Official Journal on 3 November 2026 and enters into force on 23 November 2026. It raises the thresholds to EUR 2,000,000 for supplies and services and EUR 10,000,000 for works, and adds the open procedure, innovation partnerships, dynamic purchasing systems and rules for joint procurement across Member States. Framework agreements can run for up to 10 years. Member States must apply it from 24 February 2028. Until the Netherlands does, today's thresholds apply.
General information, not legal advice.
Sources: European Commission: Defence procurement (Directive 2009/81/EC), Rijksoverheid: European procurement rules for Defence (Dutch), EUR-Lex: Directive 2009/81/EC (consolidated 1 January 2026), EUR-Lex: Directive (EU) 2026/2383 (Omnibus V)
Terms: ADV, Prime contractor, Sub-supplier
Last checked: 2026-11-17. Reviewed on 2026-11-17
Register your company
What do I need in place before I bid on a defence contract?
Most requirements arrive through the contract, so read the tender documents first. Typical items are a quality management system, security requirements where the contract carries national security risk, and export control authorisations for goods that leave the country. Which ones apply depends on the contract.
Dutch Defence says it may require a quality management system depending on the contract, with standards generally based on ISO and NATO, including AQAP for products made for specific military purposes. See the quality answers.
Contracts that touch national security must also meet the ABRO requirements, and the company needs a positive ABRO declaration before it starts the assignment. See the security answers.
Some defence buyers ask for an NCAGE code. See the registration answers.
Goods and technology that cross a border can need an export control authorisation, and sanctions apply to every transaction. See the export control answers.
Start with the cheapest step: read the contract's clauses, then list which of these it names.
General information, not legal advice.
Sources: Rijksoverheid: Doing business with Defence (Dutch), Defensie.nl: Information for suppliers (Dutch), Business.gov.nl: Security requirements for government contracts (ABRO), European Commission: Defence procurement (Directive 2009/81/EC)
Terms: AQAP 2110, ABRO, NCAGE, Export licence
Last checked: 2026-11-15. Reviewed on 2026-11-16
Register your company
What is a Technology Readiness Level (TRL)?
A Technology Readiness Level (TRL) is a nine-step scale for how mature a technology is, from basic principles observed (TRL 1) to an actual system proven in an operational environment (TRL 9). EU funding calls use it: when a call requires a TRL, the Horizon Europe general annexes give the definitions that apply unless the call says otherwise.
The nine levels as the European Commission defines them: TRL 1, basic principles observed; TRL 2, technology concept formulated; TRL 3, experimental proof of concept; TRL 4, technology validated in a lab; TRL 5, technology validated in a relevant environment; TRL 6, technology demonstrated in a relevant environment; TRL 7, system prototype demonstration in an operational environment; TRL 8, system complete and qualified; TRL 9, actual system proven in an operational environment.
For key enabling technologies, the relevant environment at TRL 5 and 6 is an industrially relevant one, and TRL 9 means competitive manufacturing, or proven in space.
A call can set its own definition, so check the wording in the call documents before you state your product's level.
General information, not legal advice.
Sources: European Commission: Horizon Europe Work Programme 2026-2027, General Annexes (Technology Readiness Levels)
Terms: TRL (Technology Readiness Level)
Last checked: 2026-11-17. Reviewed on 2026-11-17
Register your company
General information, not legal advice.